Resin 3D printing produces detailed parts, but washing and curing can become messy, time-consuming steps. A dedicated station combines both tasks in a more controlled workflow, helping remove uncured resin and finish models consistently.
These 10 best 3D printer wash and cure stations for home workshops include compact units, larger systems for bigger prints, and printer bundles for users building a complete setup. Compare capacity, compatibility, controls, and workspace needs before choosing.
Best 10 3d Printer Wash Cure Stations for Home Workshops Picks for 2026
Large-Model Workhorse
- Separate washing and curing machines
- 7.5-liter container for larger resin prints
- 405nm UV curing with UV-blocking cover
Best For: Large resin models and higher-throughput home workshops
Compact Precision Pick
- 4-liter bucket with larger cleaning basket
- Gooseneck light targets intricate details
- Adjustable basket and one-click controls
Best For: Compatible printers up to 7.3 inches
Flexible Everyday Station
- Two-in-one washing and curing design
- Basket or build-plate washing modes
- Supports LCD, DLP, and SLA printers
Best For: Mixed-printer home workshops needing flexible cleanup
Maximum-Capacity System
- 15.1-liter liquid capacity
- Automatic wash-then-cure mode
- Spray rinsing and customizable cycles
Best For: Large models and high-volume home workshop processing
Large-Model Pick
- 7.5L cleaning capacity
- Large 250 × 290 mm curing area
- Basket and hanging cleaning modes
Best For: Larger resin prints and expanding home workshops
Compact Detail Pick
- 3L basket and 4L bucket
- Adjustable 100/165 mm basket heights
- Gooseneck lamp for small-part curing
Best For: Smaller resin printers and detail-focused post-processing
Safety-Focused Pick
- 7.5L wash capacity
- 24-light all-around UV curing
- UV-blocking cover and safety pause
Best For: Large-print workflows prioritizing safety and strong agitation
Best Integrated Starter Bundle
Photon Mono 4 + Wash & Cure 3.0
- 10K Mono 4 printer with 17μm XY pixels
- 4L wash bucket with 42% larger basket capacity
- Gooseneck light targets detailed curing areas
Best For: Matched home resin-printing and post-processing setup
Best Dedicated Dual-Unit Setup
- Separate wash and cure units can run simultaneously
- Sealed wash design helps limit splashing
- Dual 14-LED bars and rotating chassis support even curing
Best For: ELEGOO users processing multiple resin models
Best Compact Anycubic Workflow
Photon Mono 4 with Wash & Cure 3.0
- 10K printing with 1.5-second stated exposure times
- 4L wash bucket with 3L cleaning basket
- Gooseneck curing light improves small-detail coverage
Best For: New Anycubic users wanting a coordinated resin workflow
Large-Model Workhorse – ELEGOO Mercury X Bundle
For home workshops handling larger resin prints, the ELEGOO Mercury X Bundle is a two-machine setup that separates washing and curing. Its 7.5-liter washing container is designed for larger parts from printers such as the Saturn and Mars 3, while the dedicated curing unit uses 405nm UV lighting.
Best For: Home workshops processing larger resin models and users who want washing and curing handled simultaneously.
Pros:
- Large 7.5-liter container accommodates bigger prints.
- Separate washer and curing machine support concurrent post-processing.
- Two LED light bars and four lower LEDs promote thorough curing.
- Single-knob operation and a UV-blocking cover simplify use.
Cons:
- Requires liquid in the bucket before operating the washing machine.
- Water-washable resin should be cleaned with running water instead.
- Models should be dried before curing.
This is a practical choice among 3d printer wash cure stations for home workshops when capacity and throughput matter more than a compact footprint.
Compact Precision Pick – ANYCUBIC Wash and Cure 3
The ANYCUBIC Wash and Cure 3 combines expanded cleaning capacity with targeted curing control, making it a versatile option for 3d printer wash cure stations for home workshops. Its 4-liter bucket and adjustable basket support printers up to 7.3 inches, while the gooseneck light focuses extra energy on detailed areas.
Best For: Home users with compatible printers who want adjustable washing height and localized curing for model details.
Pros:
- 42% larger cleaning basket than the previous Wash & Cure 2.
- Adjustable basket heights help accommodate different platforms and manage IPA use.
- Gooseneck light increases irradiation in small or difficult-to-reach areas.
- One-click controls and adjustable one-to-30-minute cycles are straightforward.
Cons:
- Compatibility is aimed at LCD printers measuring 7.3 inches or less.
- Its 4-liter bucket is smaller than the large-capacity options in this roundup.
Choose this model when flexible basket positioning, quieter operation, and detail-oriented curing are more useful than maximum print capacity.
Flexible Everyday Station – ELEGOO Mercury Plus 2.0
The ELEGOO Mercury Plus 2.0 is a two-in-one station for routine resin-print cleanup and curing. It offers two washing approaches—using the basket or mounting the build plate—and combines a rotating curing platform with visible time controls.
Best For: Home workshops seeking a flexible, broadly compatible station for LCD, DLP, and SLA resin prints.
Pros:
- Washes and cures in one machine to streamline post-processing.
- Basket and build-plate washing modes offer useful flexibility.
- 360-degree rotating platform supports even curing.
- Adjustable platform bracket and broad printer compatibility improve versatility.
Cons:
- The supplied dimensions are unusually large, so check available workspace carefully.
- It is a combined station rather than a separate washer-and-curer arrangement.
For mixed-printer households, this is one of the more adaptable 3d printer wash cure stations for home workshops, especially when build-plate washing is convenient.
Maximum-Capacity System – ANYCUBIC Wash & Cure Max 3.0
For exceptionally large resin prints, the ANYCUBIC Wash & Cure Max 3.0 brings a 15.1-liter liquid capacity and a stated wash capacity of 305 x 165 x 300 mm. It supports automatic wash-then-cure cycles as well as separate, customizable modes.
Best For: Large home workshops processing substantial models with compatible printers up to 13.6 inches.
Pros:
- 15.1-liter capacity accommodates unusually large models.
- Automatic mode can wash and then cure with one click.
- 360-degree spray rinsing and bottom cleaning target residual resin in holes and recesses.
- Separate and customizable washing and curing modes add control.
Cons:
- Its 18.96 kg weight makes it a substantial workshop appliance.
- Compatibility is limited to printers with build volumes of 13.6 inches or less.
- It is likely excessive for users processing only small models.
This is the capacity-focused option among these 3d printer wash cure stations for home workshops, with automation and detergent-saving claims aimed at frequent, large-format processing.
Large-Model Pick – ELEGOO Mercury Plus 3.0
For home workshops seeking 3d printer wash cure stations for home workshops, the ELEGOO Mercury Plus 3.0 stands out for its large 7.5-liter cleaning capacity and roomy curing area. It combines washing and curing in one unit and supports models from resin printers up to 10 inches.
Best For: Larger resin prints and users who want flexible basket or build-platform cleaning.
Pros:
- Large 7.5-liter cleaning capacity with a maximum cleaning size of 230 × 135 × 260 mm.
- Large curing area measuring up to 250 mm in diameter by 290 mm high.
- Offers both basket cleaning and hanging cleaning modes.
- Uses 24 405nm LEDs, a reflective mirror, rotating turntable, and bottom light source for all-around curing.
Cons:
- Its larger footprint may require substantial bench space.
- At 13.72 pounds, it is not especially lightweight.
The Mercury Plus 3.0 is a practical choice when print size and cleaning flexibility matter more than a compact setup. Its broad compatibility and generous capacity make it well suited to growing home resin-printing workflows.
Compact Detail Pick – Anycubic Wash & Cure 3.0
The Anycubic Wash & Cure 3.0 is a focused option for 3d printer wash cure stations for home workshops, especially when working with resin printers up to 7.3 inches. Its adjustable basket, gooseneck curing lamp, and simple rotary controls emphasize convenient post-processing.
Best For: Smaller resin-printing setups that need adjustable cleaning heights and targeted curing.
Pros:
- Provides a 3-liter cleaning basket and 4-liter cleaning bucket.
- Dual-layer basket supports 100 mm and 165 mm cleaning heights.
- Gooseneck lamp increases irradiation energy by 30,000 µW/cm² in the 1–3 cm range.
- Offers one- to 30-minute cure settings and individually keyed wash and cure modes.
Cons:
- Its stated capacity is intended for printers sized 7.3 inches or less.
- It is relatively heavy at 17.64 pounds.
Choose this Anycubic model if your prints fit its smaller capacity and you value adjustable basket positioning or extra attention to small-part curing. It is less suited to users who regularly process large models.
Safety-Focused Pick – ELEGOO Mercury Plus V3
For home workshops comparing 3d printer wash cure stations for home workshops, this upgraded ELEGOO Mercury Plus V3 combines a 7.5-liter wash capacity with safety-oriented curing features. Its adjustable basket can accommodate build plates up to 10 inches and can wash models directly on the plate.
Best For: Users who want large-model capacity, strong agitation, and added UV-cover safety features.
Pros:
- Supports a 7.5-liter wash capacity and a curing area up to 250 mm by 290 mm high.
- Uses 24 405nm UV lights, a rotating transparent turntable, and reflective base for even curing.
- POM bearing supports smoother turbine rotation and stronger cleaning agitation.
- UV-blocking cover filters 99.9% of harmful UV light, with an automatic pause safety switch.
Cons:
- The large capacity and 13-pound weight may be more than smaller workflows need.
- Its larger design can require dedicated bench space.
This Mercury Plus V3 is compelling for resin users processing larger prints who also prioritize controlled operation and direct build-plate washing. The adjustable, corrosion-resistant PP basket adds useful flexibility as printer sizes change.
Best Integrated Starter Bundle – Photon Mono 4 + Wash & Cure 3.0
For home workshops looking for 3d printer wash cure stations for home workshops in a ready-to-use package, this Anycubic bundle combines the Photon Mono 4 resin printer with the Wash & Cure 3.0. It pairs detailed 10K printing with a larger cleaning bucket and upgraded curing features.
Best For: Home users who want a matched Anycubic printer, washing station, and curing station for detailed resin projects.
Pros:
- Photon Mono 4 provides 9024 x 5120 resolution with 17 x 17μm XY pixels.
- Build volume measures 153.4 x 87 x 165 mm.
- Wash & Cure 3.0 has a 4L cleaning bucket and 42% more basket capacity than Wash & Cure 2.
- Gooseneck light design adds focused curing energy for small or difficult areas.
Cons:
- This is a bundled printer and post-processing setup, so it may be more equipment than buyers who only need a wash-and-cure station require.
- The stated cleaning capacity is tailored to LCD printers sized 7.3 inches or less.
This bundle is a practical choice when you want the printer and post-processing workflow planned around one another. Its larger wash capacity and flexible curing light make it especially useful for regular home resin-printing sessions.
Best Dedicated Dual-Unit Setup – ELEGOO Mercury X Bundle
The ELEGOO Mercury X Bundle is a dedicated option for home workshops comparing 3d printer wash cure stations for home workshops. Separate wash and cure machines can operate simultaneously, helping streamline post-processing when you have multiple models to handle.
Best For: ELEGOO resin-printer owners who want separate washing and curing units with simultaneous operation.
Pros:
- Two 14-LED light bars, a Fresnel lens, and a rotating chassis support even curing.
- Sealed cleaning design helps reduce splashing, while the large impeller supports efficient washing.
- Wash and cure units can run at the same time with the included dedicated adapter.
- Timer controls support settings up to 30 minutes.
Cons:
- The separate-unit design occupies more space than a combined station; listed dimensions are 18.5 x 12 x 11.4 inches.
- Cleaning and curing sizes are limited to the stated maximum dimensions.
- Compatibility is specified primarily for listed ELEGOO resin printers and models within the size limits.
Choose the Mercury X when workflow speed matters more than compactness. Its simultaneous operation and sealed wash design make it well suited to users processing multiple resin models in a home workshop.
Best Compact Anycubic Workflow – Photon Mono 4 with Wash & Cure 3.0
This Anycubic package combines a 10K Photon Mono 4 with the Wash & Cure 3.0, giving home workshops a coordinated printing and post-processing workflow. It is a strong fit for buyers evaluating 3d printer wash cure stations for home workshops alongside a new resin printer.
Best For: Home makers who want detailed resin printing, a 4L wash bucket, and focused curing in one Anycubic package.
Pros:
- 10K mono LCD delivers 9024 x 5120 resolution and 17 x 17μm XY pixels.
- LighTurbo matrix lighting and 1.5-second stated exposure times support detailed, efficient printing.
- Wash & Cure 3 provides a 3L cleaning basket and 4L total bucket volume.
- Flexicure Gooseneck design increases energy in the 1–3 cm range for small model details.
Cons:
- Its 153.4 x 87 x 165 mm print volume is suited to small-to-medium resin projects rather than oversized models.
- The wash-and-cure capacity is positioned for resin printers sized 7.3 inches or less.
This package makes sense for a new Anycubic setup where print detail and post-processing capacity need to be balanced. The focused gooseneck light is a useful addition for curing tops, recesses, and other small features.
How We Picked the Best 3d Printer Wash Cure Stations for Home Workshops
We focused on stations suited to typical home resin-printing workflows, comparing wash capacity, curing coverage, basket or platform design, controls, enclosure features, and general compatibility with LCD, DLP, or SLA printers. We also included both standalone stations and bundles so beginners and existing printer owners can find relevant options.
Because product specifications and included accessories can vary by seller or package, verify the current listing before ordering. Pay particular attention to container size, maximum model dimensions, power requirements, and whether the station includes a curing turntable, cleaning basket, or compatible platform adapters.
Quick Comparison
| Best for | What to prioritize |
|---|---|
| Small home workshop | Compact footprint, simple controls, and easy cleanup |
| Large resin models | Large washing volume and generous curing area |
| Multiple printer sizes | Adjustable platforms, baskets, and broad printer compatibility |
| First-time resin users | A complete printer-and-station bundle with matched accessories |
| Frequent printing | Durable construction, reliable sealing, and convenient controls |
Key Buying Factors
Wash Capacity and Model Size
Measure your largest typical print rather than relying only on the advertised volume. A larger container is useful for oversized parts or batches, while a compact station may be easier to place and clean in a small workspace.
Curing Coverage
Look for effective light coverage around the model and a rotating platform that helps reduce uneven curing. A gooseneck or adjustable light design can be useful for reaching difficult shapes, but correct exposure time and model rotation still matter.
Workflow and Cleanup
Consider how easily you can remove the wash container, drain or filter used solvent, and handle the build plate. Secure lids, sealed containers, removable baskets, and straightforward controls can make regular use less unpleasant.
Compatibility and Space
Check whether the station accepts your printer’s build plate or requires transferring models to a basket. Confirm the external dimensions, ventilation needs, and available power outlet before placing it in a workshop.
Who Should Buy Which 3d Printer Wash Cure Stations for Home Workshops?
Choose a compact wash-and-cure station if you print small to medium models and value a tidy, space-efficient setup. Select a large-capacity model if your printer produces bigger parts or you often wash several pieces together. Users who already own a compatible resin printer can focus on station capacity and convenience, while beginners may benefit from a printer bundle that reduces compatibility questions.
For the most practical choice among these 3d Printer Wash Cure Stations for Home Workshops, match the station to your largest routine print, available workspace, and expected printing frequency. Do not pay for oversized capacity if your models are small, but leave room for future projects if you plan to upgrade your printer.